Table des matières
Version : 2023.01
Last update : 2023/12/17 07:26
DOE608 - Course Validation
Contents
- DOE608 - Course Validation
- Contents
- Course Materials
- What this course covered
- Validation of Acquired Knowledge
- Course Evaluation
Course Materials
Access to the course materials, as well as to the LABS and Validation of Acquired Knowledge, is provided through an annual subscription per trainee to a web-based course platform.
The subscription allows trainees to:
- redo the LABS in autonomous mode,
- consult updated course content during the subscription period,
- exchange with other participants in the session and with former trainees.
What this course covered
- DOE601 - Virtualisation by Isolation
- Presentation of Virtualisation by Isolation
- History
- Presentation of Namespaces
- Presentation of CGroups
- LAB #1 - cgroups v1
- 1.1 - Preparation
- 1.2 - Presentation
- 1.3 - Memory Limitation
- 1.4 - The cgcreate command
- 1.5 - The cgexec command
- 1.6 - The cgdelete command
- 1.7 - The /etc/cgconfig.conf file
- 1.8 - The cgconfigparser command
- LAB #2 - cgroups v2
- 2.1 - Preparation
- 2.2 - Overview
- 2.3 - Limiting CPU Resources
- 2.4 - The systemctl set-property command
- Introducing Linux Containers
- LAB #3 - Working with LXC
- 3.1 - Installation
- 3.2 - Creating a Simple Container
- 3.3 - Starting a Simple Container
- 3.4 - Attaching to a Simple Container
- 3.5 - Basic LXC Commands
- The lxc-console Command
- The lxc-stop Command
- The lxc-execute Command
- The lxc-info Command
- The lxc-freeze Command
- The lxc-unfreeze Command
- Other Commands
- 3.6 - Creating an Ephemeral Container
- The lxc-copy Command
- 3.7 - Saving Containers
- The lxc-snapshot Command
- DOE602 - Getting started with Docker
- Introduction to Docker
- Virtualisation and Containerisation
- The AUFS File System
- OverlayFS and Overlay2
- Docker Daemon and Docker Engine
- Docker CE and Docker EE
- Docker CE
- Docker EE
- Docker and Mirantis
- LAB #1 - Working with Docker
- 1.1 - Installing docker on Linux
- Debian 11
- CentOS 8
- 1.2 - Starting a Container
- 1.3 - Viewing the list of Containers and Images
- 1.4 - Searching for an Image in a Repository
- 1.5 - Deleting a Container from an Image
- 1.6 - Creating an Image from a Modified Container
- 1.7 - Deleting an Image
- 1.8 - Creating a Container with a Specific Name
- 1.9 - Executing a Command in a Container
- 1.10 - Injecting Environment Variables into a Container
- 1.11 - Modifying a Container Host Name
- 1.12 - Mapping Container Ports
- 1.13 - Starting a Container in Detached mode
- 1.14 - Accessing Container Services from the Outside
- 1.15 - Stopping and Starting a Container
- 1.16 - Using Signals with a Container
- 1.17 - Forcing the deletion of a running Container
- 1.18 - Simply using a Volume
- 1.19 - Downloading an image without creating a Container
- 1.20 - Attaching to a running Container
- 1.21 - Installing software in a Container
- 1.22 - Using the docker commit command
- 1.23 - Connecting to the container from the outside
- DOE603 - Managing and Storing Docker Images
- LAB #1 - Re-creating an official docker image
- 1.1 - Using a Dockerfile
- 1.2 - FROM
- 1.3 - RUN
- 1.4 - ENV
- 1.5 - VOLUME
- 1.6 - COPY
- 1.7 - ENTRYPOINT
- 1.8 - EXPOSE
- 1.9 - CMD
- 1.10 - Other commands
- LAB #2 - Creating a Dockerfile
- 2.1 - Creating and testing the script
- 2.2 - Good Cache Practices
- LAB #3 - Installing a Private Registry
- 3.1 - Creating a Local Registry,
- 3.2 - Creating a Dedicated Registry Server
- Configuring the Client
- DOE604 - Volume, Network and Resource Management
- LAB #1 - Volume Management
- 1.1 - Automatic management using Docker
- 1.2 - Manual Volume Management
- 1.3 - Manual management of a Bindmount
- LAB #2 - Network Management
- 2.1 - The Docker Network Approach
- Bridge
- Host
- None
- Links
- 2.2 - Running Wordpress in a container
- 2.3 - Managing a Microservices Architecture
- LAB #3 - Monitoring Containers
- 3.1 - Logs
- 3.2 - Processes
- 3.3 - Continuous Activity
- DOE605 - Docker Compose, Docker Machine and Docker Swarm
- LAB #1 - Docker Compose
- 1.1 - Installation
- 1.2 - Installing Wordpress with Docker Compose
- LAB #2 - Docker Machine
- 2.1 - Introduction
- 2.2 - Creating Docker Virtual Machines
- 2.3 - Listing Docker VMs
- 2.4 - Obtaining VM IP addresses
- 2.5 - Connecting to a Docker VM
- LAB #3 - Docker Swarm
- 3.1 - Overview
- 3.2 - Initializing Docker Swarm
- 3.3 - Leader status
- 3.4 - Joining the Swarm
- 3.5 - Viewing Swarm Information
- 3.6 - Starting a Service
- 3.7 - Scaling Up and Scaling Down a Service
- 3.8 - Checking Node Status
- 3.9 - High Availability
- 3.10 - Deleting a Service
- 3.11 - Backing up Docker Swarm
- 3.12 - Restoring Docker Swarm
- DOE606 - Overlay Network Management with Docker in Swarm mode
- The Docker Network Model
- LAB #1 - Overlay Network Management
- 1.1 - Creating a network overlay
- 1.2 - Creating a Service
- 1.3 - Moving the Service to another Overlay Network
- 1.4 - DNS container discovery
- 1.5 - Creating a Custom Overlay Network
- LAB #2 - Microservices Architecture Management
- 2.1 - Implementing Docker Swarm with overlay networks
- DOE607 - Docker Security Management
- LAB #1 - Using Docker Secrets
- LAB #2 - Creating a Trusted User to Control the Docker Daemon
- LAB #3 - The docker-bench-security.sh script
- LAB #4 - Securing the Docker Host Configuration
- 4.1 - [WARN] 1.2.1 - Ensure a separate partition for containers has been created
- 4.2 - [WARN] 1.2.3 - Ensure auditing is configured for the Docker daemon
- LAB #5 - Securing the Docker daemon configuration
- 5.1 - [WARN] 2.1 - Ensure network traffic is restricted between containers on the default bridge
- 5.2 - [WARN] 2.8 - Enable user namespace support
- 5.3 - [WARN] 2.11 - Ensure that authorization for Docker client commands is enabled
- 5.4 - [WARN] 2.12 - Ensure centralized and remote logging is configured
- 5.5 - [WARN] 2.14 - Ensure Userland Proxy is Disabled
- 5.6 - [WARN] 2.17 - Ensure containers are restricted from acquiring new privileges
- 5.7 - The /etc/docker/daemon.json file
- LAB #6 - Securing Images and Build Files
- 6.1 - [WARN] 4.1 - Ensure a user for the container has been created
- 6.2 - [WARN] 4.5 - Ensure Content trust for Docker is Enabled
- 6.3 - [WARN] 4.6 - Ensure that HEALTHCHECK instructions have been added to container images
- LAB #7 - Securing the Container Runtime
- 7.1 - [WARN] 5.1 - Ensure AppArmor Profile is Enabled
- 7.2 - [WARN] 5.2 - Ensure SELinux security options are set, if applicable
- 7.3 - [WARN] 5.10 - Ensure memory usage for container is limited
- 7.4 - [WARN] 5.11 - Ensure CPU priority is set appropriately on the container
- 7.5 - [WARN] 5.12 - Ensure the container's root filesystem is mounted as read only
- 7.6 - [WARN] 5.14 - Ensure 'on-failure' container restart policy is set to '5'
- 7.7 - [WARN] 5.25 - Ensure the container is restricted from acquiring additional privileges
- 7.8 - [WARN] 5.26 - Ensure container health is checked at runtime
- 7.9 - [WARN] 5.28 - Ensure PIDs cgroup limit is used
- LAB #8 - Securing Images with Docker Content Trust
- 8.1 - DOCKER_CONTENT_TRUST
- 8.2 - DCT and the docker pull command
- The disable-content-trust option
- 8.3 - DCT and the docker push command
- 8.4 - DCT and the docker build command
- Creating a second Repositry
- Deleting a signature
- LAB #9 - Securing the Docker daemon socket
- 9.1 - Creating the Certificate Authority Certificate
- 9.2 - Creating the Docker Daemon Host Server Certificate
- 9.3 - Creating the Client Certificate
- 9.4 - Starting the Docker Daemon with a Direct Invocation
- 9.5 - Configuring the Client
- DOE608 - Course Validation
- Course Materials
- What this course covered
- Validation of Acquired Knowledge
- Course Evaluation
Training Evaluation
To validate your training, please complete the Training Evaluation and the Validation of Acquired Knowledge.
Copyright © 2023 Hugh Norris - Non-contractual document. The programme is subject to change without notice.
