DOE608 - Course Validation

• DOE608 - Course Validation
  • Contents
  • Course Materials
  • What this course covered
  • Validation of Acquired Knowledge
  • Course Evaluation

Access to the course materials, as well as to the LABS and Validation of Acquired Knowledge, is provided through an annual subscription per trainee to a web-based course platform.

The subscription allows trainees to:

• redo the LABS in autonomous mode,
• consult updated course content during the subscription period,
• exchange with other participants in the session and with former trainees.

• DOE600 - Course Presentation
  • Prerequisites
    • Hardware
    • Software
    • Internet
  • Use of the Infrastructure
  • Curriculum

• DOE601 - Virtualisation by Isolation
  • Presentation of Virtualisation by Isolation
    • History
  • Presentation of Namespaces
  • Presentation of CGroups
    • LAB #1 - cgroups v1
      • 1.1 - Preparation
      • 1.2 - Presentation
      • 1.3 - Memory Limitation
      • 1.4 - The cgcreate command
      • 1.5 - The cgexec command
      • 1.6 - The cgdelete command
      • 1.7 - The /etc/cgconfig.conf file
      • 1.8 - The cgconfigparser command
    • LAB #2 - cgroups v2
      • 2.1 - Preparation
      • 2.2 - Overview
      • 2.3 - Limiting CPU Resources
      • 2.4 - The systemctl set-property command
  • Introducing Linux Containers
    • LAB #3 - Working with LXC
      • 3.1 - Installation
      • 3.2 - Creating a Simple Container
      • 3.3 - Starting a Simple Container
      • 3.4 - Attaching to a Simple Container
      • 3.5 - Basic LXC Commands
        • The lxc-console Command
        • The lxc-stop Command
        • The lxc-execute Command
        • The lxc-info Command
        • The lxc-freeze Command
        • The lxc-unfreeze Command
        • Other Commands
      • 3.6 - Creating an Ephemeral Container
        • The lxc-copy Command
      • 3.7 - Saving Containers
        • The lxc-snapshot Command

• DOE602 - Getting started with Docker
  • Introduction to Docker
    • Virtualisation and Containerisation
    • The AUFS File System
    • OverlayFS and Overlay2
    • Docker Daemon and Docker Engine
    • Docker CE and Docker EE
      • Docker CE
      • Docker EE
    • Docker and Mirantis
  • LAB #1 - Working with Docker
    • 1.1 - Installing docker on Linux
      • Debian 11
      • CentOS 8
    • 1.2 - Starting a Container
    • 1.3 - Viewing the list of Containers and Images
    • 1.4 - Searching for an Image in a Repository
    • 1.5 - Deleting a Container from an Image
    • 1.6 - Creating an Image from a Modified Container
    • 1.7 - Deleting an Image
    • 1.8 - Creating a Container with a Specific Name
    • 1.9 - Executing a Command in a Container
    • 1.10 - Injecting Environment Variables into a Container
    • 1.11 - Modifying a Container Host Name
    • 1.12 - Mapping Container Ports
    • 1.13 - Starting a Container in Detached mode
    • 1.14 - Accessing Container Services from the Outside
    • 1.15 - Stopping and Starting a Container
    • 1.16 - Using Signals with a Container
    • 1.17 - Forcing the deletion of a running Container
    • 1.18 - Simply using a Volume
    • 1.19 - Downloading an image without creating a Container
    • 1.20 - Attaching to a running Container
    • 1.21 - Installing software in a Container
    • 1.22 - Using the docker commit command
    • 1.23 - Connecting to the container from the outside

• DOE603 - Managing and Storing Docker Images
  • LAB #1 - Re-creating an official docker image
    • 1.1 - Using a Dockerfile
    • 1.2 - FROM
    • 1.3 - RUN
    • 1.4 - ENV
    • 1.5 - VOLUME
    • 1.6 - COPY
    • 1.7 - ENTRYPOINT
    • 1.8 - EXPOSE
    • 1.9 - CMD
    • 1.10 - Other commands
  • LAB #2 - Creating a Dockerfile
    • 2.1 - Creating and testing the script
    • 2.2 - Good Cache Practices
  • LAB #3 - Installing a Private Registry
    • 3.1 - Creating a Local Registry,
    • 3.2 - Creating a Dedicated Registry Server
      • Configuring the Client

• DOE604 - Volume, Network and Resource Management
  • LAB #1 - Volume Management
    • 1.1 - Automatic management using Docker
    • 1.2 - Manual Volume Management
    • 1.3 - Manual management of a Bindmount
  • LAB #2 - Network Management
    • 2.1 - The Docker Network Approach
      • Bridge
      • Host
      • None
      • Links
    • 2.2 - Running Wordpress in a container
    • 2.3 - Managing a Microservices Architecture
  • LAB #3 - Monitoring Containers
    • 3.1 - Logs
    • 3.2 - Processes
    • 3.3 - Continuous Activity

• DOE605 - Docker Compose, Docker Machine and Docker Swarm
  • LAB #1 - Docker Compose
    • 1.1 - Installation
    • 1.2 - Installing Wordpress with Docker Compose
  • LAB #2 - Docker Machine
    • 2.1 - Introduction
    • 2.2 - Creating Docker Virtual Machines
    • 2.3 - Listing Docker VMs
    • 2.4 - Obtaining VM IP addresses
    • 2.5 - Connecting to a Docker VM
  • LAB #3 - Docker Swarm
    • 3.1 - Overview
    • 3.2 - Initializing Docker Swarm
    • 3.3 - Leader status
    • 3.4 - Joining the Swarm
    • 3.5 - Viewing Swarm Information
    • 3.6 - Starting a Service
    • 3.7 - Scaling Up and Scaling Down a Service
    • 3.8 - Checking Node Status
    • 3.9 - High Availability
    • 3.10 - Deleting a Service
    • 3.11 - Backing up Docker Swarm
    • 3.12 - Restoring Docker Swarm

• DOF606 - Overlay Network Management with Docker in Swarm mode
  • The Docker Network Model
  • LAB #1 - Overlay Network Management
    • 1.1 - Creating a network overlay
    • 1.2 - Creating a Service
    • 1.3 - Moving the Service to another Overlay Network
    • 1.4 - DNS container discovery
    • 1.5 - Creating a Custom Overlay Network
  • LAB #2 - Microservices Architecture Management
    • 2.1 - Implementing Docker Swarm with overlay networks

• DOF607 - Docker Security Management
  • LAB #1 - Using Docker Secrets
  • LAB #2 - Creating a Trusted User to Control the Docker Daemon
  • LAB #3 - The docker-bench-security.sh script
  • LAB #4 - Securing the Docker Host Configuration
  • LAB #5 - Securing the Docker daemon configuration
    • 5.1 - The /etc/docker/daemon.json file
  • LAB #6 - Securing Images and Build Files
  • LAB #7 - Securing the Container Runtime
  • LAB #8 - Securing Images with Docker Content Trust
    • 8.1 - DOCKER_CONTENT_TRUST
    • 8.2 - DCT and the docker pull command
      • The disable-content-trust option
    • 8.3 - DCT and the docker push command
    • 8.4 - DCT and the docker build command
      • Creating a second Repositry
      • Deleting a signature
  • LAB #9 - Securing the Docker daemon socket
    • 9.1 - Creating the Certificate Authority Certificate
    • 9.2 - Creating the Docker Daemon Host Server Certificate
    • 9.3 - Creating the Client Certificate
    • 9.4 - Starting the Docker Daemon with a Direct Invocation
    • 9.5 - Configuring the Client

• DOE608 - Course Validation
  • Course Materials
  • What this course covered
  • Validation of acquired knowledge
  • Course Evaluation

To validate your training, please complete the Training Evaluation and the Validation of Acquired Knowledge.

Copyright © 2024 Hugh Norris - Non-contractual document. The programme is subject to change without notice.