Ceci est une ancienne révision du document !
Table des matières
Version : 2020.01
Dernière mise-à-jour : 2020/04/12 13:15
DOF505 - Utilisation d'Ansible avec Windows
Pré-requis Windows
Ansible est capable de travailler avec les versions de Windows™ suivantes :
- Windows™ 7,
- Windows™ 8.1,
- Windowst™ 10,
- Windows™ Server 2008,
- Windows™ 2008 R2,
- Wondows™ 2012,
- Windows™ 2012 R2,
- Windows™ 2016,
- Windows™ 2019.
Ansible nécessite sur chaque hôte :
- PowerShell 3.0 ou supérieur
- Au moins .NET 4.0.
Arrêter les Machines Virtuelles non Indisponsables
Formations en FFP
Utilisez l'interface graphique de VirtualBox et arrêtez les machines virtuelles TargetA, TargetB, Web01, Web02, Web03 et Web04.
Restaurez ensuite les machines virtuelles TargetA, TargetB, Web01, Web02, Web03 et Web04 vers leurs états d'origine en revenant à snapshot1.
Formations en FAD
Utilisez les commandes suivantes pour arrêter les machines virtuelles TargetA, TargetB, Web01, Web02, Web03 et Web04 :
trainee@ansible:~$ exit déconnexion Connection to localhost closed. desktop@server16:~$ VBoxManage controlvm TargetA poweroff 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage controlvm TargetB poweroff 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage controlvm Web01 poweroff 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage controlvm Web02 poweroff 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage controlvm Web03 poweroff 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage controlvm Web04 poweroff 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Restaurez l'état d'origine des machines virtuelles :
desktop@server16:~$ VBoxManage snapshot TargetA restorecurrent Restoring snapshot 'snapshot1' (6f8ddad7-39d5-4dd5-9dd2-42037445bab3) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage snapshot TargetB restorecurrent Restoring snapshot 'snapshot1' (418bbd10-72e0-4bd7-88f6-8f5e665c6149) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage snapshot Web01 restorecurrent Restoring snapshot 'snapshot1' (c7b39871-8472-4969-8080-9fd1b338a419) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage snapshot Web02 restorecurrent Restoring snapshot 'snapshot1' (752d3b31-5758-4b24-8d66-b0203f493120) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage snapshot Web03 restorecurrent Restoring snapshot 'snapshot1' (b428b30c-54a7-4fd2-9ca7-180779685a88) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% desktop@server16:~$ VBoxManage snapshot Web04 restorecurrent Restoring snapshot 'snapshot1' (840c0972-40a0-4339-8ae3-0e36c061fb5b) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Reconnectez-vous à la machine virtuelle Ansible :
desktop@server16:~$ ssh -l trainee localhost -p 2222 trainee@localhost's password: Linux ansible.i2tch.loc 4.9.0-8-amd64 #1 SMP Debian 4.9.130-2 (2018-10-27) x86_64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Apr 12 10:07:57 2020 from 10.0.2.2 trainee@ansible:~$
LAB #14 - Préparer Windows 10
Formations en FFP
Lancez le logiciel VirtuelBox puis lancez la machine virtuelle Windows10.
Formations en FAD
Lancez le logiciel X2Go Client. Cliquez ensuite sur :
Session > Nouvelle session
Dans la fenêtre qui s'ouvre, renseignez les informations suivantes en remplacant XX par le numéro de votre serveur et cliquez sur le bouton OK :
Dans le volet de droite, cliquez sur l'icône du serverXX.ittraining.network :
Renseignez le mot de passe qui vous a été communiqué et cliquez sur le bouton OK.
Lancez le logiciel VirtualBox sur votre serveur puis lancez la machine virtuelle Windows10.
Mettre à Jour PowerShell et .NET
Afin de mettre à jour les versions de PowerShell et .NET, Ansible fournit un script appelé Upgrade-PowerShell.ps1. Exécutez PowerShell en tant qu'Administrateur :
Windows PowerShell Copyright (C) Microsoft Corporation. Tous droits réservés. Testez le nouveau système multiplateforme PowerShell https://aka.ms/pscore6 PS C:\Windows\system32> $url = "https://raw.githubusercontent.com/jborean93/ansible-windows/master/scripts/Upgrade-PowerShell.ps1" PS C:\Windows\system32> $file = "$env:temp\Upgrade-PowerShell.ps1" PS C:\Windows\system32> $username = "hughn" PS C:\Windows\system32> $password = "P@$$w0rd" PS C:\Windows\system32> (New-Object -TypeName System.Net.WebClient).DownloadFile($url, $file) PS C:\Windows\system32> Set-ExecutionPolicy -ExecutionPolicy Unrestricted -Force PS C:\Windows\system32> &$file -Version 5.1 -Username $username -Password $password -Verbose COMMENTAIRES : 2019-10-24T09:36:23 - INFO - starting script COMMENTAIRES : 2019-10-24T09:36:23 - INFO - current and target PS version are the same, no action is required COMMENTAIRES : 2019-10-24T09:36:23 - INFO - clearing auto logon registry properties
Au cas où, vous pouvez enlever l'auto-login de l'administrateur et remettre la politique d'exécution à Restricted avec les commandes suivantes :
PS C:\Windows\system32> Set-ExecutionPolicy -ExecutionPolicy Restricted -Force PS C:\Windows\system32> $reg_winlogon_path = "HKLM:\Software\Microsoft\Windows NT\CurrentVersion\Winlogon" PS C:\Windows\system32> Set-ItemProperty -Path $reg_winlogon_path -Name AutoAdminLogon -Value 0 PS C:\Windows\system32> Remove-ItemProperty -Path $reg_winlogon_path -Name DefaultUserName -ErrorAction SilentlyContinue PS C:\Windows\system32> Remove-ItemProperty -Path $reg_winlogon_path -Name DefaultPassword -ErrorAction SilentlyContinue PS C:\Windows\system32>
Configurer WinRM
Pour mettre en place un listener WinRM en HTTP et un listener WinRM en HTTPS, créer un certificat auto-signé et activer l'authentification de base sur le service WinRM, utilisez le script ConfigureRemotingForAnsible.ps1 :
PS C:\Windows\system32> $url = "https://raw.githubusercontent.com/ansible/ansible/devel/examples/scripts/ConfigureRemotingForAnsible.ps1" PS C:\Windows\system32> $file = "$env:temp\ConfigureRemotingForAnsible.ps1" PS C:\Windows\system32> (New-Object -TypeName System.Net.WebClient).DownloadFile($url, $file) PS C:\Windows\system32> powershell.exe -ExecutionPolicy ByPass -File $file Self-signed SSL certificate generated; thumbprint: 17502EEEAC259F4C76D0F199A4B803E94E980CAD wxf : http://schemas.xmlsoap.org/ws/2004/09/transfer a : http://schemas.xmlsoap.org/ws/2004/08/addressing w : http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd lang : fr-FR Address : http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous ReferenceParameters : ReferenceParameters Ok. PS C:\Windows\system32>
Consulter les Informations sur WinRM
Pour voir la liste des listeners ainsi créés, utilisez la commande suivante :
PS C:\Windows\system32> winrm enumerate winrm/config/Listener
Listener
Address = *
Transport = HTTP
Port = 5985
Hostname
Enabled = true
URLPrefix = wsman
CertificateThumbprint
ListeningOn = 10.0.2.15, 10.29.0.34, 127.0.0.1, ::1
Listener
Address = *
Transport = HTTPS
Port = 5986
Hostname = DESKTOP-1OV5NMP
Enabled = true
URLPrefix = wsman
CertificateThumbprint = 17502EEEAC259F4C76D0F199A4B803E94E980CAD
ListeningOn = 10.0.2.15, 10.29.0.34, 127.0.0.1, ::1
PS C:\Windows\system32>
Pour obtenir les informations concernant le certificat, exécutez les commandes suivantes :
PS C:\Windows\system32> $thumbprint = "17502EEEAC259F4C76D0F199A4B803E94E980CAD"
PS C:\Windows\system32> Get-ChildItem -Path cert:\LocalMachine\My -Recurse | Where-Object { $_.Thumbprint -eq $thumbprint } | Select-Object *
PSPath : Microsoft.PowerShell.Security\Certificate::LocalMachine\My\17502EEEAC259F4C76D0F199A4B803E94
E980CAD
PSParentPath : Microsoft.PowerShell.Security\Certificate::LocalMachine\My
PSChildName : 17502EEEAC259F4C76D0F199A4B803E94E980CAD
PSDrive : Cert
PSProvider : Microsoft.PowerShell.Security\Certificate
PSIsContainer : False
EnhancedKeyUsageList : {Authentification du serveur (1.3.6.1.5.5.7.3.1)}
DnsNameList : {DESKTOP-1OV5NMP, DESKTOP-1OV5NMP}
SendAsTrustedIssuer : False
EnrollmentPolicyEndPoint : Microsoft.CertificateServices.Commands.EnrollmentEndPointProperty
EnrollmentServerEndPoint : Microsoft.CertificateServices.Commands.EnrollmentEndPointProperty
PolicyId :
Archived : False
Extensions : {System.Security.Cryptography.Oid, System.Security.Cryptography.Oid,
System.Security.Cryptography.Oid, System.Security.Cryptography.Oid}
FriendlyName :
IssuerName : System.Security.Cryptography.X509Certificates.X500DistinguishedName
NotAfter : 22/10/2022 11:45:21
NotBefore : 23/10/2019 11:45:21
HasPrivateKey : True
PrivateKey : System.Security.Cryptography.RSACryptoServiceProvider
PublicKey : System.Security.Cryptography.X509Certificates.PublicKey
RawData : {48, 130, 5, 49...}
SerialNumber : 73F2EADFBABB86B7438B30B157A1C3FB
SubjectName : System.Security.Cryptography.X509Certificates.X500DistinguishedName
SignatureAlgorithm : System.Security.Cryptography.Oid
Thumbprint : 17502EEEAC259F4C76D0F199A4B803E94E980CAD
Version : 3
Handle : 2829331536176
Issuer : CN=DESKTOP-1OV5NMP
Subject : CN=DESKTOP-1OV5NMP
PS C:\Windows\system32>
Dernièrement pour obtenir des informations concernant le service, exécutez les deux commandes suivantes :
PS C:\Windows\system32> winrm get winrm/config/Service
Service
RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
MaxConcurrentOperations = 4294967295
MaxConcurrentOperationsPerUser = 1500
EnumerationTimeoutms = 240000
MaxConnections = 300
MaxPacketRetrievalTimeSeconds = 120
AllowUnencrypted = false
Auth
Basic = true
Kerberos = true
Negotiate = true
Certificate = false
CredSSP = false
CbtHardeningLevel = Relaxed
DefaultPorts
HTTP = 5985
HTTPS = 5986
IPv4Filter = *
IPv6Filter = *
EnableCompatibilityHttpListener = false
EnableCompatibilityHttpsListener = false
CertificateThumbprint
AllowRemoteAccess = true
PS C:\Windows\system32> winrm get winrm/config/Winrs
Winrs
AllowRemoteShellAccess = true
IdleTimeout = 7200000
MaxConcurrentUsers = 2147483647
MaxShellRunTime = 2147483647
MaxProcessesPerShell = 2147483647
MaxMemoryPerShellMB = 2147483647
MaxShellsPerUser = 2147483647
PS C:\Windows\system32>
Créer un Utilisateur Local pour Ansible
Créez un utilisateur local appelé trainee ayant un mot de passe trainee et le type de compte Administrateur.
Exécutez ensuite la commande suivante :
PS C:\Windows\system32> winrm configSDDL default
Service
RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)(A;;GXGR;;;S-1-5-21-1664865965-3091009943-3054596003-1002)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
MaxConcurrentOperations = 4294967295
MaxConcurrentOperationsPerUser = 1500
EnumerationTimeoutms = 240000
MaxConnections = 300
MaxPacketRetrievalTimeSeconds = 120
AllowUnencrypted = false
Auth
Basic = true
Kerberos = true
Negotiate = true
Certificate = false
CredSSP = false
CbtHardeningLevel = Relaxed
DefaultPorts
HTTP = 5985
HTTPS = 5986
IPv4Filter = *
IPv6Filter = *
EnableCompatibilityHttpListener = false
EnableCompatibilityHttpsListener = false
CertificateThumbprint
AllowRemoteAccess = true
PS C:\Windows\system32>
Dans la fenêtre Autorisations pour Default, ajoutez l'utilisateur pour Ansible et accordez lui les permissions Exécution en plus des permissions Lecture :
LAB #15 - Préparer le Contrôleur Ansible
Installer pywinrm
Dans la machine virtuelle Ansible, installez le support python pour WinRM :
root@ansible:~# pip3 install "pywinrm>=0.3.0" Collecting pywinrm>=0.3.0 Downloading https://files.pythonhosted.org/packages/0d/12/13a3117bbd2230043aa32dcfa2198c33269665eaa1a8fa26174ce49b338f/pywinrm-0.3.0-py2.py3-none-any.whl Collecting requests-ntlm>=0.3.0 (from pywinrm>=0.3.0) Downloading https://files.pythonhosted.org/packages/03/4b/8b9a1afde8072c4d5710d9fa91433d504325821b038e00237dc8d6d833dc/requests_ntlm-1.1.0-py2.py3-none-any.whl Collecting xmltodict (from pywinrm>=0.3.0) Downloading https://files.pythonhosted.org/packages/28/fd/30d5c1d3ac29ce229f6bdc40bbc20b28f716e8b363140c26eff19122d8a5/xmltodict-0.12.0-py2.py3-none-any.whl Requirement already satisfied: six in /usr/lib/python3/dist-packages (from pywinrm>=0.3.0) Requirement already satisfied: requests>=2.9.1 in /usr/lib/python3/dist-packages (from pywinrm>=0.3.0) Collecting ntlm-auth>=1.0.2 (from requests-ntlm>=0.3.0->pywinrm>=0.3.0) Downloading https://files.pythonhosted.org/packages/50/09/5e397eb18685b14fd8b209e26cdb4fa6451c82c1bcc651fef05fa73e7b27/ntlm_auth-1.4.0-py2.py3-none-any.whl Requirement already satisfied: cryptography>=1.3 in /usr/lib/python3/dist-packages (from requests-ntlm>=0.3.0->pywinrm>=0.3.0) Installing collected packages: ntlm-auth, requests-ntlm, xmltodict, pywinrm Successfully installed ntlm-auth-1.4.0 pywinrm-0.3.0 requests-ntlm-1.1.0 xmltodict-0.12.0
Tester la Configuration
Pour tester la configuration, modifiez le fichier /etc/hosts :
root@ansible:~# vi /etc/hosts root@ansible:~# cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 ansible.i2tch.loc ansible 10.0.2.9 ansible.i2tch.loc ansible 10.0.2.10 targeta.i2tch.loc targeta 10.0.2.11 web01.i2tch.loc web01 10.0.2.12 web02.i2tch.loc web02 10.0.2.13 web03.i2tch.loc web03 10.0.2.14 web04.i2tch.loc web04 10.0.2.15 windows10.i2tch.loc windows10 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters root@ansible:~# exit déconnexion trainee@ansible:~$
Créez ensuite un Inventory file en tant que trainee :
trainee@ansible:~$ vi inventory trainee@ansible:~$ cat inventory [windows] windows10 [windows:vars] ansible_user=trainee ansible_password=trainee ansible_connection=winrm ansible_winrm_server_cert_validation=ignore
Procédez au test :
trainee@ansible:~$ ansible windows -i inventory -m win_ping
windows10 | SUCCESS => {
"changed": false,
"ping": "pong"
}
LAB #16 - Travailler avec Ansible et Windows
Obtenir les Informations sur Windows10
De la même façon qu'avec Linux, il est possible d'utiliser le module setup pour obtenir des Facts :
trainee@ansible:~$ ansible windows -i inventory -m setup
windows10 | SUCCESS => {
"ansible_facts": {
"ansible_architecture": "64 bits",
"ansible_bios_date": "12/01/2006",
"ansible_bios_version": "VirtualBox",
"ansible_date_time": {
"date": "2019-10-24",
"day": "24",
"epoch": "1571923636,11092",
"hour": "13",
"iso8601": "2019-10-24T11:27:16Z",
"iso8601_basic": "20191024T132716094254",
"iso8601_basic_short": "20191024T132716",
"iso8601_micro": "2019-10-24T11:27:16.094254Z",
"minute": "27",
"month": "10",
"second": "16",
"time": "13:27:16",
"tz": "Romance Standard Time",
"tz_offset": "+02:00",
"weekday": "Thursday",
"weekday_number": "4",
"weeknumber": "42",
"year": "2019"
},
"ansible_distribution": "Microsoft Windows 10 Professionnel",
"ansible_distribution_major_version": "10",
"ansible_distribution_version": "10.0.18362.0",
"ansible_domain": "",
"ansible_env": {
"ALLUSERSPROFILE": "C:\\ProgramData",
"APPDATA": "C:\\Users\\trainee\\AppData\\Roaming",
"COMPUTERNAME": "DESKTOP-1OV5NMP",
"ComSpec": "C:\\Windows\\system32\\cmd.exe",
"CommonProgramFiles": "C:\\Program Files\\Common Files",
"CommonProgramFiles(x86)": "C:\\Program Files (x86)\\Common Files",
"CommonProgramW6432": "C:\\Program Files\\Common Files",
"DriverData": "C:\\Windows\\System32\\Drivers\\DriverData",
"LOCALAPPDATA": "C:\\Users\\trainee\\AppData\\Local",
"NUMBER_OF_PROCESSORS": "4",
"OS": "Windows_NT",
"PATHEXT": ".COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.CPL",
"PROCESSOR_ARCHITECTURE": "AMD64",
"PROCESSOR_IDENTIFIER": "Intel64 Family 6 Model 142 Stepping 10, GenuineIntel",
"PROCESSOR_LEVEL": "6",
"PROCESSOR_REVISION": "8e0a",
"PROMPT": "$P$G",
"PSExecutionPolicyPreference": "Unrestricted",
"PSModulePath": "C:\\Users\\trainee\\Documents\\WindowsPowerShell\\Modules;C:\\Program Files\\WindowsPowerShell\\Modules;C:\\Windows\\system32\\WindowsPowerShell\\v1.0\\Modules",
"PUBLIC": "C:\\Users\\Public",
"Path": "C:\\Windows\\system32;C:\\Windows;C:\\Windows\\System32\\Wbem;C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\;C:\\Windows\\System32\\OpenSSH\\;C:\\Users\\trainee\\AppData\\Local\\Microsoft\\WindowsApps",
"ProgramData": "C:\\ProgramData",
"ProgramFiles": "C:\\Program Files",
"ProgramFiles(x86)": "C:\\Program Files (x86)",
"ProgramW6432": "C:\\Program Files",
"SystemDrive": "C:",
"SystemRoot": "C:\\Windows",
"TEMP": "C:\\Users\\trainee\\AppData\\Local\\Temp",
"TMP": "C:\\Users\\trainee\\AppData\\Local\\Temp",
"USERDOMAIN": "DESKTOP-1OV5NMP",
"USERNAME": "trainee",
"USERPROFILE": "C:\\Users\\trainee",
"windir": "C:\\Windows"
},
"ansible_fqdn": "DESKTOP-1OV5NMP.",
"ansible_hostname": "DESKTOP-1OV5NMP",
"ansible_interfaces": [
{
"connection_name": "Ethernet",
"default_gateway": "10.0.2.1",
"dns_domain": "expressvpn",
"interface_index": 5,
"interface_name": "Intel(R) PRO/1000 MT Desktop Adapter",
"macaddress": "08:00:27:07:68:97"
}
],
"ansible_ip_addresses": [
"10.0.2.15"
],
"ansible_kernel": "10.0.18362.0",
"ansible_lastboot": "2019-10-24 12:05:22Z",
"ansible_machine_id": "S-1-5-21-1664865965-3091009943-3054596003",
"ansible_memtotal_mb": 2048,
"ansible_nodename": "DESKTOP-1OV5NMP.",
"ansible_os_family": "Windows",
"ansible_os_name": "Microsoft Windows 10 Professionnel",
"ansible_os_product_type": "workstation",
"ansible_owner_contact": "",
"ansible_owner_name": "hugh.norris@i2tch.eu",
"ansible_powershell_version": 5,
"ansible_processor": [
"GenuineIntel",
"Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz",
"GenuineIntel",
"Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz",
"GenuineIntel",
"Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz",
"GenuineIntel",
"Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz"
],
"ansible_processor_cores": 4,
"ansible_processor_count": 1,
"ansible_processor_threads_per_core": 1,
"ansible_processor_vcpus": 4,
"ansible_product_name": "VirtualBox",
"ansible_product_serial": "0",
"ansible_reboot_pending": false,
"ansible_swaptotal_mb": 0,
"ansible_system": "Win32NT",
"ansible_system_description": "",
"ansible_system_vendor": "innotek GmbH",
"ansible_uptime_seconds": 4921,
"ansible_user_dir": "C:\\Users\\trainee",
"ansible_user_gecos": "",
"ansible_user_id": "trainee",
"ansible_user_sid": "S-1-5-21-1664865965-3091009943-3054596003-1002",
"ansible_virtualization_role": "guest",
"ansible_virtualization_type": "VirtualBox",
"ansible_win_rm_certificate_expires": "2022-10-22 11:45:21",
"ansible_windows_domain": "WORKGROUP",
"ansible_windows_domain_member": false,
"ansible_windows_domain_role": "Stand-alone workstation",
"gather_subset": [
"all"
],
"module_setup": true
},
"changed": false
}
Exécutez une Commande
Créez le PlayBook command.yml :
trainee@ansible:~$ vi command.yml
trainee@ansible:~$ cat command.yml
---
- name: ipconfig
hosts: windows
tasks:
- name: run ipconfig
win_command: ipconfig
register: ipconfig
- debug: var=ipconfig
Exécutez le PlayBook :
trainee@ansible:~$ ansible-playbook command.yml -i inventory
PLAY [ipconfig] *********************************************************************************************************************************************************
TASK [Gathering Facts] **************************************************************************************************************************************************
ok: [windows10]
TASK [run ipconfig] *****************************************************************************************************************************************************
changed: [windows10]
TASK [debug] ************************************************************************************************************************************************************
ok: [windows10] => {
"ipconfig": {
"changed": true,
"cmd": "ipconfig",
"delta": "0:00:00.087233",
"end": "2019-10-24 12:09:59.585841",
"failed": false,
"rc": 0,
"start": "2019-10-24 12:09:59.498608",
"stderr": "",
"stderr_lines": [],
"stdout": "\r\nConfiguration IP de Windows\r\n\r\n\r\nCarte Ethernet Ethernet 2 :\r\n\r\n Statut du m�dia. . . . . . . . . . . . : M�dia d�connect�\r\n Suffixe DNS propre � la connexion. . . : \r\n\r\nCarte Ethernet Ethernet :\r\n\r\n Suffixe DNS propre � la connexion. . . : expressvpn\r\n Adresse IPv4. . . . . . . . . . . . . .: 10.0.2.15\r\n Masque de sous-r�seau. . . .�. . . . . : 255.255.255.0\r\n Passerelle par d�faut. . . .�. . . . . : 10.0.2.1\r\n",
"stdout_lines": [
"",
"Configuration IP de Windows",
"",
"",
"Carte Ethernet Ethernet 2 :",
"",
" Statut du m�dia. . . . . . . . . . . . : M�dia d�connect�",
" Suffixe DNS propre � la connexion. . . : ",
"",
"Carte Ethernet Ethernet :",
"",
" Suffixe DNS propre � la connexion. . . : expressvpn",
" Adresse IPv4. . . . . . . . . . . . . .: 10.0.2.15",
" Masque de sous-r�seau. . . .�. . . . . : 255.255.255.0",
" Passerelle par d�faut. . . .�. . . . . : 10.0.2.1"
]
}
}
PLAY RECAP **************************************************************************************************************************************************************
windows10 : ok=3 changed=1 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
Exécuter un script PowerShell
Créez un script PowerShell pour démarrer le service Windows Update :
trainee@ansible:~$ vi script1.ps1 trainee@ansible:~$ cat script1.ps1 Start-Service -Name wuauserv
Créez ensuite un PlayBook appelé winupdate.yml :
trainee@ansible:~$ vi winupdate.yml
trainee@ansible:~$ cat winupdate.yml
- name: "PowerShell script"
hosts: "windows"
gather_facts: "false"
tasks:
- name: "Windows Update"
script: "script1.ps1"
Exécutez le PlayBook :
trainee@ansible:~$ ansible-playbook winupdate.yml -i inventory PLAY [PowerShell script] ************************************************************************************************************************************************ TASK [Windows Update] *************************************************************************************************************************************************** changed: [windows10] PLAY RECAP ************************************************************************************************************************************************************** windows10 : ok=1 changed=1 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
Installer un Logiciel avec Chocolatey
Chocolatey est un gestionnaire de paquets pour Windows™.
Créez le PlayBook firefox.yml :
trainee@ansible:~$ vi firefox.yml
trainee@ansible:~$ cat firefox.yml
---
- name: Install Firefox using Chocolatey
hosts: all
tasks:
- name: Install Firefox
win_chocolatey:
name: firefox
state: present
Exécutez le PlayBook :
trainee@ansible:~$ ansible-playbook firefox.yml -i inventory PLAY [Install Firefox using Chocolatey] ********************************************************************************************************************************* TASK [Gathering Facts] ************************************************************************************************************************************************** ok: [windows10] TASK [Install Firefox] ************************************************************************************************************************************************** [WARNING]: Chocolatey was missing from this system, so it was installed during this task run. changed: [windows10] PLAY RECAP ************************************************************************************************************************************************************** windows10 : ok=2 changed=1 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
Créer un Utilisateur Local
Créez le PlayBook user.yml :
trainee@ansible:~$ vi users.yml
trainee@ansible:~$ cat users.yml
---
- name: Create a user
hosts: windows
tasks:
- name: Create Jean
win_user:
name: jean
password: P@$$w0rd
state: present
groups:
- utilisateurs
Exécutez le PlayBook :
trainee@ansible:~$ ansible-playbook users.yml -i inventory PLAY [Create a user] **************************************************************************************************************************************************** TASK [Gathering Facts] ************************************************************************************************************************************************** ok: [windows10] TASK [Create Jean] ****************************************************************************************************************************************************** changed: [windows10] PLAY RECAP ************************************************************************************************************************************************************** windows10 : ok=2 changed=1 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
Vérifiez que le compte a été créé :
<html>
Copyright © 2020 Hugh NORRIS
</html>
