DOF405 - Puppet en mode Agent/Maître

Arrêtez la machine virtuelle vagrant. Ouvrez VirtualBox et importez les machines virtuelles PuppetMaster, PuppetSlave01 et PuppetSlave02. :

Fichier > Importer un appareil virtuel ...

Les noms d'utilisateurs et les mots de passe sont identiques pour chaque machine :

Créez les redirections de ports dans le réseau NAT NatNetwork de VirtualBox (Fichier > Paramètres > Réseau > NatNetwork > Redirection de ports) selon le tableau suivant :

Vous devez vous connecter aux machines virtuelles de la façon suivante :

Ouvrez un terminal et tapez la commande suivante pour la machine PuppetMaster :

$ ssh -l trainee localhost -p 2422

Ouvrez un autre terminal et tapez la commande suivante pour la machine PuppetSlave01 :

$ ssh -l trainee localhost -p 2522

Ouvrez un autre terminal et tapez la commande suivante pour la machine PuppetSlave02 :

$ ssh -l trainee localhost -p 2622

Ouvrez un autre terminal et tapez la commande suivante pour la machine PuppetMaster :

• Host Name –> localhost
• Port –> 2422

Ouvrez un autre terminal et tapez la commande suivante pour la machine PuppetSlave01 :

• Host Name –> localhost
• Port –> 2522

Ouvrez un autre terminal et tapez la commande suivante pour la machine PuppetSlave02 :

• Host Name –> localhost
• Port –> 2622

Configurez les trois machines virtuelles pour qu'elles soient sur le même fuseau d'horaire :

trainee@master:~$ su -
Password: fenestros
root@master:~# dpkg-reconfigure tzdata

Current default time zone: 'Europe/Paris'
Local time is now:      Wed Feb 12 14:11:40 CET 2020.
Universal Time is now:  Wed Feb 12 13:11:40 UTC 2020.

trainee@slave01:~$ su -
Password: fenestros
root@slave01:~# dpkg-reconfigure tzdata

Current default time zone: 'Europe/Paris'
Local time is now:      Wed Feb 12 14:12:21 CET 2020.
Universal Time is now:  Wed Feb 12 13:12:21 UTC 2020.

[trainee@slave02 ~]$ su -
Mot de passe : fenestros
Dernière connexion : mercredi 13 mars 2019 à 12:55:24 CET sur tty1
[root@slave02 ~]# timedatectl set-timezone 'Europe/Paris'
[root@slave02 ~]# date
Wed 12 Feb 14:12:51 CET 2020

[root@slave02 ~]# vi /etc/sysconfig/selinux 
[root@slave02 ~]# cat /etc/sysconfig/selinux 

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=permissive
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted 


[root@slave02 ~]# setenforce permissive

Installez Puppet dans la machine virtuelle PuppetMaster :

root@master:~# wget https://apt.puppetlabs.com/puppet-release-bionic.deb
--2020-02-12 14:13:20--  https://apt.puppetlabs.com/puppet-release-bionic.deb
Resolving apt.puppetlabs.com (apt.puppetlabs.com)... 13.225.38.129, 13.225.38.76, 13.225.38.45, ...
Connecting to apt.puppetlabs.com (apt.puppetlabs.com)|13.225.38.129|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 11724 (11K) [application/x-debian-package]
Saving to: ‘puppet-release-bionic.deb’

puppet-release-bionic.deb       100%[=====================================================>]  11.45K  --.-KB/s    in 0s      

2020-02-12 14:13:21 (346 MB/s) - ‘puppet-release-bionic.deb’ saved [11724/11724]

root@master:~# dpkg -i puppet-release-bionic.deb
Selecting previously unselected package puppet-release.
(Reading database ... 128539 files and directories currently installed.)
Preparing to unpack puppet-release-bionic.deb ...
Unpacking puppet-release (1.0.0-7bionic) ...
Setting up puppet-release (1.0.0-7bionic) ...

root@master:~# apt update
Hit:1 http://us.archive.ubuntu.com/ubuntu bionic InRelease
Hit:2 http://security.ubuntu.com/ubuntu bionic-security InRelease                             
Hit:3 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease                            
Hit:4 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease     
Get:5 http://apt.puppetlabs.com bionic InRelease [85.3 kB]               
Get:6 http://apt.puppetlabs.com bionic/puppet amd64 Packages [39.9 kB]
Get:7 http://apt.puppetlabs.com bionic/puppet i386 Packages [16.4 kB]
Get:8 http://apt.puppetlabs.com bionic/puppet all Packages [16.4 kB]
Fetched 158 kB in 2s (83.9 kB/s)
Reading package lists... Done
Building dependency tree       
Reading state information... Done
624 packages can be upgraded. Run 'apt list --upgradable' to see them.

root@master:~# apt install puppetserver
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  ca-certificates-java java-common net-tools openjdk-8-jre-headless puppet-agent
Suggested packages:
  default-jre fonts-dejavu-extra fonts-ipafont-gothic fonts-ipafont-mincho fonts-wqy-microhei fonts-wqy-zenhei
The following NEW packages will be installed:
  ca-certificates-java java-common net-tools openjdk-8-jre-headless puppet-agent puppetserver
0 upgraded, 6 newly installed, 0 to remove and 624 not upgraded.
Need to get 110 MB of archives.
After this operation, 290 MB of additional disk space will be used.
Do you want to continue? [Y/n] y

Utilisez la commande puppet config pour définir la valeur de la variable dns_alt_names :

root@master:~# /opt/puppetlabs/bin/puppet config set dns_alt_names 'master,master.i2tch.loc' --section main
root@master:~# cat /etc/puppetlabs/puppet/puppet.conf | grep dns_alt_names
dns_alt_names = master,master.i2tch.loc

Utilisez la commande puppet config pour définir la valeur de la variable server :

root@master:~# /opt/puppetlabs/bin/puppet config set server 'master.i2tch.loc'

Ajoutez la ligne export PATH=/opt/puppetlabs/bin:$PATH au fichier ~/.bashrc :

root@master:~# vi .bashrc
root@master:~# tail .bashrc
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
#if [ -f /etc/bash_completion ] && ! shopt -oq posix; then
#    . /etc/bash_completion
#fi

export PATH=/opt/puppetlabs/bin:$PATH

Saisissez la commande suivante :

root@master:~# export PATH=/opt/puppetlabs/bin:$PATH

Activez et démarrez le serveur Puppet :

root@master:~# systemctl enable puppetserver
Synchronizing state of puppetserver.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable puppetserver

root@master:~# systemctl start puppetserver
oot@master:~# systemctl status puppetserver.service 
● puppetserver.service - puppetserver Service
   Loaded: loaded (/lib/systemd/system/puppetserver.service; enabled; vendor pre
   Active: active (running) since Wed 2020-02-12 14:43:22 CET; 8min ago
  Process: 746 ExecStart=/opt/puppetlabs/server/apps/puppetserver/bin/puppetserv
 Main PID: 838 (java)
    Tasks: 46 (limit: 4915)
   CGroup: /system.slice/puppetserver.service
           └─838 /usr/bin/java -Xms2g -Xmx2g -Djruby.logger.class=com.puppetlabs

Feb 12 14:42:34 master.i2tch.loc systemd[1]: Starting puppetserver Service...
Feb 12 14:43:22 master.i2tch.loc systemd[1]: Started puppetserver Service.

Dernièrement, vérifiez que le fichier /etc/hosts contient des entrées pour master.i2tch.loc, slave01.i2tch.loc et slave02.i2tch.loc :

root@master:~# vi /etc/hosts
root@master:~# cat /etc/hosts
127.0.0.1       localhost
127.0.1.1       master.i2tch.loc        master   
10.0.2.4        master.i2tch.loc  master  
10.0.2.5        slave01.i2tch.loc       slave01
10.0.2.6        slave02.i2tch.loc       slave02

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

root@slave01:~# wget https://apt.puppetlabs.com/puppet-release-bionic.deb
--2020-02-12 14:27:25--  https://apt.puppetlabs.com/puppet-release-bionic.deb
Resolving apt.puppetlabs.com (apt.puppetlabs.com)... 143.204.226.21, 143.204.226.18, 143.204.226.112, ...
Connecting to apt.puppetlabs.com (apt.puppetlabs.com)|143.204.226.21|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 11724 (11K) [application/x-debian-package]
Saving to: ‘puppet-release-bionic.deb’

puppet-release-bionic.deb       100%[=====================================================>]  11.45K  --.-KB/s    in 0s      

2020-02-12 14:27:26 (97.4 MB/s) - ‘puppet-release-bionic.deb’ saved [11724/11724]

root@slave01:~# dpkg -i puppet-release-bionic.deb
Selecting previously unselected package puppet-release.
(Reading database ... 128539 files and directories currently installed.)
Preparing to unpack puppet-release-bionic.deb ...
Unpacking puppet-release (1.0.0-7bionic) ...
Setting up puppet-release (1.0.0-7bionic) ...

root@slave01:~# apt update
Hit:1 http://security.ubuntu.com/ubuntu bionic-security InRelease   
Hit:2 http://us.archive.ubuntu.com/ubuntu bionic InRelease          
Get:3 http://apt.puppetlabs.com bionic InRelease [85.3 kB]               
Hit:4 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease                   
Hit:5 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease                 
Get:6 http://apt.puppetlabs.com bionic/puppet i386 Packages [16.4 kB]
Get:7 http://apt.puppetlabs.com bionic/puppet amd64 Packages [39.9 kB]
Get:8 http://apt.puppetlabs.com bionic/puppet all Packages [16.4 kB]
Fetched 158 kB in 2s (81.3 kB/s)      
Reading package lists... Done
Building dependency tree       
Reading state information... Done
619 packages can be upgraded. Run 'apt list --upgradable' to see them.

root@slave01:~# apt install puppet-agent
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  puppet-agent
0 upgraded, 1 newly installed, 0 to remove and 619 not upgraded.
Need to get 20.2 MB of archives.
After this operation, 116 MB of additional disk space will be used.
Get:1 http://apt.puppetlabs.com bionic/puppet amd64 puppet-agent amd64 6.12.0-1bionic [20.2 MB]
Fetched 20.2 MB in 3s (6,846 kB/s)       
Selecting previously unselected package puppet-agent.
(Reading database ... 128544 files and directories currently installed.)
Preparing to unpack .../puppet-agent_6.12.0-1bionic_amd64.deb ...
Unpacking puppet-agent (6.12.0-1bionic) ...
Setting up puppet-agent (6.12.0-1bionic) ...
Created symlink /etc/systemd/system/multi-user.target.wants/puppet.service → /lib/systemd/system/puppet.service.
Created symlink /etc/systemd/system/multi-user.target.wants/pxp-agent.service → /lib/systemd/system/pxp-agent.service.
Removed /etc/systemd/system/multi-user.target.wants/pxp-agent.service.
Processing triggers for libc-bin (2.27-3ubuntu1) ...

[root@slave02 ~]# rpm -Uvh https://yum.puppet.com/puppet/puppet-release-el-7.noarch.rpm
Retrieving https://yum.puppet.com/puppet/puppet-release-el-7.noarch.rpm
warning: /var/tmp/rpm-tmp.PYL8Aj: Header V4 RSA/SHA256 Signature, key ID ef8d349f: NOKEY
Preparing...                          ################################# [100%]
Updating / installing...
   1:puppet-release-1.0.0-3.el7       ################################# [100%]

[root@slave02 ~]# yum install puppet-agent
Loaded plugins: fastestmirror, langpacks
Determining fastest mirrors
 * base: mirrors.ircam.fr
 * extras: miroir.univ-lorraine.fr
 * updates: mirrors.standaloneinstaller.com
base                                                                                                   | 3.6 kB  00:00:00     
extras                                                                                                 | 2.9 kB  00:00:00     
puppet                                                                                                 | 2.5 kB  00:00:00     
updates                                                                                                | 2.9 kB  00:00:00     
(1/5): base/7/x86_64/group_gz                                                                          | 165 kB  00:00:00     
(2/5): extras/7/x86_64/primary_db                                                                      | 159 kB  00:00:00     
(3/5): puppet/x86_64/primary_db                                                                        | 256 kB  00:00:02     
(4/5): base/7/x86_64/primary_db                                                                        | 6.0 MB  00:00:02     
(5/5): updates/7/x86_64/primary_db                                                                     | 6.7 MB  00:00:02     
Resolving Dependencies
--> Running transaction check
---> Package puppet-agent.x86_64 0:6.12.0-1.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

==============================================================================================================================
 Package                         Arch                      Version                            Repository                 Size
==============================================================================================================================
Installing:
 puppet-agent                    x86_64                    6.12.0-1.el7                       puppet                     23 M

Transaction Summary
==============================================================================================================================
Install  1 Package

Total download size: 23 M
Installed size: 23 M
Is this ok [y/d/N]: y

Utilisez la commande puppet config sur chaque noeud pour définir la valeur de la variable server :

root@slave01:~# /opt/puppetlabs/bin/puppet config set server 'master.i2tch.loc' --section main
root@slave01:~# cat /etc/puppetlabs/puppet/puppet.conf | grep server
server = master.i2tch.loc

[root@slave02 ~]# /opt/puppetlabs/bin/puppet config set server 'master.i2tch.loc' --section main
[root@slave02 ~]# cat /etc/puppetlabs/puppet/puppet.conf | grep server
server = master.i2tch.loc

Utilisez la commande puppet resource afin d'activer et de démarrer le service de puppet agent :

root@slave01:~# /opt/puppetlabs/bin/puppet resource service puppet ensure=running enable=true
Notice: /Service[puppet]/ensure: ensure changed 'stopped' to 'running'
service { 'puppet':
  ensure => 'running',
  enable => 'true',
}

[root@slave02 ~]# /opt/puppetlabs/bin/puppet resource service puppet ensure=running enable=true
Notice: /Service[puppet]/ensure: ensure changed 'stopped' to 'running'
service { 'puppet':
  ensure => 'running',
  enable => 'true',
}

Retournez sur la machine virtuelle PuppetMaster et lister les certificats en attente de validation :

root@master:~# /opt/puppetlabs/bin/puppetserver ca list
Requested Certificates:
    slave01.i2tch.loc   (SHA256)  81:02:B3:C7:6F:BE:DB:48:93:9E:1A:A5:87:CA:AF:E5:DB:14:09:11:2D:43:60:39:1C:BE:6F:A1:CF:C0:BD:31
    slave02.i2tch.loc   (SHA256)  EF:BF:00:84:F1:F0:3B:C0:5F:A8:6F:49:98:E5:73:FA:39:B6:16:8E:8D:B3:0E:38:04:76:4D:2E:BF:BE:53:57

Validez les certificats en attente :

root@master:~# /opt/puppetlabs/bin/puppetserver ca sign --certname slave01.i2tch.loc,slave02.i2tch.loc
Successfully signed certificate request for slave01.i2tch.loc
Successfully signed certificate request for slave02.i2tch.loc

Si vous ne voyez pas de certificats ou seulement un certificat sur deux, arrêtez le service puppet sur le(s) noeud(s) concerné(s) :

root@slave01:~# systemctl stop puppet
root@slave02:~# systemctl stop puppet

Supprimez les certificats existants :

root@master:~# puppetserver ca clean --certname slave01.i2tch.loc
root@master:~# puppetserver ca clean --certname slave02.i2tch.loc

Lancez ensuite la commande suivante :

root@slave01:~# puppet agent --test
Info: Creating a new RSA SSL key for slave01.i2tch.loc
Info: csr_attributes file loading from /etc/puppetlabs/puppet/csr_attributes.yaml
Info: Creating a new SSL certificate request for slave01.i2tch.loc
Info: Certificate Request fingerprint (SHA256): 81:02:B3:C7:6F:BE:DB:48:93:9E:1A:A5:87:CA:AF:E5:DB:14:09:11:2D:43:60:39:1C:BE:6F:A1:CF:C0:BD:31
Info: Certificate for slave01.i2tch.loc has not been signed yet
Couldn't fetch certificate from CA server; you might still need to sign this agent's certificate (slave01.i2tch.loc).
Exiting now because the waitforcert setting is set to 0.

root@slave02:~# puppet agent --test
Info: Creating a new RSA SSL key for slave02.i2tch.loc
Info: csr_attributes file loading from /etc/puppetlabs/puppet/csr_attributes.yaml
Info: Creating a new SSL certificate request for slave02.i2tch.loc
Info: Certificate Request fingerprint (SHA256): EF:BF:00:84:F1:F0:3B:C0:5F:A8:6F:49:98:E5:73:FA:39:B6:16:8E:8D:B3:0E:38:04:76:4D:2E:BF:BE:53:57
Info: Certificate for slave02.i2tch.loc has not been signed yet
Couldn't fetch certificate from CA server; you might still need to sign this agent's certificate (slave02.i2tch.loc).
Exiting now because the waitforcert setting is set to 0.

Retournez ensuite à la machine virtuelle master et validez les certificats en attente :

root@master:~# /opt/puppetlabs/bin/puppetserver ca sign --certname slave01.i2tch.loc,slave02.i2tch.loc
Successfully signed certificate request for slave01.i2tch.loc
Successfully signed certificate request for slave02.i2tch.loc

Retournez sur les esclaves et exécutez la commande puppet agent :

root@slave01:~# /opt/puppetlabs/bin/puppet agent -t
Info: csr_attributes file loading from /etc/puppetlabs/puppet/csr_attributes.yaml
Info: Creating a new SSL certificate request for slave01.i2tch.loc
Info: Certificate Request fingerprint (SHA256): 81:02:B3:C7:6F:BE:DB:48:93:9E:1A:A5:87:CA:AF:E5:DB:14:09:11:2D:43:60:39:1C:BE:6F:A1:CF:C0:BD:31
Info: Downloaded certificate for slave01.i2tch.loc from https://master.i2tch.loc:8140/puppet-ca/v1
Info: Using configured environment 'production'
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Retrieving locales
Info: Caching catalog for slave01.i2tch.loc
Info: Applying configuration version '1581520502'
Notice: Applied catalog in 0.01 seconds

[root@slave02 ~]# /opt/puppetlabs/bin/puppet agent -t
Info: Using configured environment 'production'
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Retrieving locales
Info: Caching catalog for slave02.i2tch.loc
Info: Applying configuration version '1581520616'
Notice: Applied catalog in 0.03 seconds

Placez-vous dans le répertoire /etc/puppetlabs/code/environments/production/modules/ et créez le répertoire accounts :

root@master:~# cd /etc/puppetlabs/code/environments/production/modules/
root@master:/etc/puppetlabs/code/environments/production/modules# mkdir accounts

Placez-vous dans le répertoire /etc/puppetlabs/code/environments/production/modules/accounts et créez les répertoires examples, files, manifests, templates :

root@master:/etc/puppetlabs/code/environments/production/modules# cd accounts

SNAPSHOT1

root@master:/etc/puppetlabs/code/environments/production/modules/accounts# mkdir {examples,files,manifests,templates}

Placez-vous dans le répertoire /etc/puppetlabs/code/environments/production/modules/accounts/manifests et créez le fichier init.pp :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts# cd manifests
root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# vi init.pp
root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# cat init.pp
class accounts {

  $rootgroup = $osfamily ? {
    'Debian'  => 'sudo',
    'RedHat'  => 'wheel',
    default   => warning('This distribution is not supported by the Accounts module'),
  }

  include accounts::groups

  user { 'toto':
    ensure      => present,
    home        => '/home/toto',
    shell       => '/bin/bash',
    managehome  => true,
    gid         => 'toto',
    groups      => "$rootgroup",
  }

}

Créez ensuite le fichier /etc/puppetlabs/code/environments/production/modules/accounts/manifests/groups.pp afin de créer le groupe toto :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# vi groups.pp
root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# cat groups.pp
class accounts::groups {

  group { 'toto':
    ensure  => present,
  }

}

Créez le mot de passe au format SHA1 pour l'utilisateur toto :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# openssl passwd -1
Password: toto
Verifying - Password: toto
$1$1lyYx3kO$sb0z34V28E7b7kYQb3Wjz.

Mettez à jour le fichier /etc/puppetlabs/code/environments/production/modules/accounts/manifests/init.pp pour inclure le mot de passe de toto :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# vi init.pp
root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# cat  init.pp
class accounts {

  $rootgroup = $osfamily ? {
    'Debian'  => 'sudo',
    'RedHat'  => 'wheel',
    default   => warning('This distribution is not supported by the Accounts module'),
  }

  include accounts::groups

  user { 'toto':
    ensure      => present,
    home        => '/home/toto',
    shell       => '/bin/bash',
    managehome  => true,
    gid         => 'toto',
    groups      => "$rootgroup",
    password    => '$1$1lyYx3kO$sb0z34V28E7b7kYQb3Wjz.',
  }

}

Validez la syntaxe du fichier :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# /opt/puppetlabs/bin/puppet parser validate init.pp

Naviguez vers le répertoire /etc/puppetlabs/code/environments/production/modules/accounts/examples :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests# cd ../examples/

Créez le fichier /etc/puppetlabs/code/environments/production/modules/accounts/examples/init.pp :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples# vi init.pp
root@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples# cat init.pp
include accounts

Testez ce manifest :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples# /opt/puppetlabs/bin/puppet apply --noop init.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.10 seconds
Notice: /Stage[main]/Accounts::Groups/Group[toto]/ensure: current_value 'absent', should be 'present' (noop)
Notice: Class[Accounts::Groups]: Would have triggered 'refresh' from 1 event
Notice: /Stage[main]/Accounts/User[toto]/ensure: current_value 'absent', should be 'present' (noop)
Notice: Class[Accounts]: Would have triggered 'refresh' from 1 event
Notice: Stage[main]: Would have triggered 'refresh' from 2 events
Notice: Applied catalog in 0.39 seconds

Appliquez maintenant le manifest :

root@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples# /opt/puppetlabs/bin/puppet apply init.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.04 seconds
Notice: /Stage[main]/Accounts::Groups/Group[toto]/ensure: created
Notice: /Stage[main]/Accounts/User[toto]/ensure: created
Notice: Applied catalog in 0.37 seconds

Déconnectez-vous et reconnectez-vous en tant que l'utilisateur toto :

hnorris@Laptop:~$ ssh -l toto localhost -p 2422
toto@localhost's password: 
Welcome to Ubuntu 18.04.1 LTS (GNU/Linux 4.15.0-29-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage


 * Canonical Livepatch is available for installation.
   - Reduce system reboots and improve kernel security. Activate at:
     https://ubuntu.com/livepatch

636 packages can be updated.
380 updates are security updates.


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

toto@master:~$ 

Naviguez vers le répertoire /etc/puppetlabs/code/environements/production/modules/accounts/files :

toto@master:~$ cd /etc/puppetlabs/code/environments/production/modules/accounts/files
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/files$ 

Copiez le fichier /etc/sshd_config vers le répertoire /etc/puppetlabs/code/environments/production/modules/accounts/files :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/files$ sudo mv /etc/ssh/sshd_config .
[sudo] password for toto: toto

Ajoutez la directive PermitRootLogin no au fichier /etc/puppetlabs/code/environments/production/modules/accounts/files/sshd_config :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/files$ sudo vi sshd_config 
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/files$ cat sshd_config 
...
# Authentication:

#LoginGraceTime 2m
#PermitRootLogin prohibit-password
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#PubkeyAuthentication yes
...

Retournez maintenant vers le répertoire /etc/puppetlabs/code/environments/production/modules/accounts/manifests :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/files$ cd ../manifests/
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ 

Créez un manifest appelé ssh.pp qui utilise un attribut file pour remplacer le fichier sshd_config par défaut avec celui de Puppet, démarrer le service ssh et re-démarrer le service ssh en cas de besoin :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ sudo vi ssh.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ cat ssh.pp
class accounts::ssh {

  $sshname = $osfamily ? {
    'Debian'  => 'ssh',
    'RedHat'  => 'sshd',
    default   => warning('This distribution is not supported by the Accounts module'),
  }

  file { '/etc/ssh/sshd_config':
    ensure  => present,
    source  => 'puppet:///modules/accounts/sshd_config',
    notify  => Service["$sshname"],
  }

  service { "$sshname":
    hasrestart  => true,
  }

}

Modifiez maintenant le fichier /etc/puppetlabs/code/environments/production/modules/accounts/manifests/init.pp afin d'inclure la classe accounts::ssh :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ sudo vi init.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ cat init.pp
class accounts {

  $rootgroup = $osfamily ? {
    'Debian'  => 'sudo',
    'RedHat'  => 'wheel',
    default   => warning('This distribution is not supported by the Accounts module'),
  }

  include accounts::groups
  include accounts::ssh

  user { 'toto':
    ensure      => present,
    home        => '/home/toto',
    shell       => '/bin/bash',
    managehome  => true,
    gid         => 'toto',
    groups      => "$rootgroup",
    password    => '$1$1lyYx3kO$sb0z34V28E7b7kYQb3Wjz.',	
  }

}

Testez ensuite la syntaxe des fichiers ssh.pp et init.pp :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ sudo /opt/puppetlabs/bin/puppet parser validate ssh.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ 
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ sudo /opt/puppetlabs/bin/puppet parser validate init.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ 

Naviguez vers le répértoire /etc/puppetlabs/code/environments/production/modules/accounts et installez l'utilitaire tree :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/manifests$ cd ..
toto@master:/etc/puppetlabs/code/environments/production/modules/accounts$ sudo apt install tree
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  tree
0 upgraded, 1 newly installed, 0 to remove and 574 not upgraded.
Need to get 40.7 kB of archives.
After this operation, 105 kB of additional disk space will be used.
Get:1 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 tree amd64 1.7.0-5 [40.7 kB]
Fetched 40.7 kB in 1s (72.3 kB/s)
Selecting previously unselected package tree.
(Reading database ... 147924 files and directories currently installed.)
Preparing to unpack .../tree_1.7.0-5_amd64.deb ...
Unpacking tree (1.7.0-5) ...
Setting up tree (1.7.0-5) ...
Processing triggers for man-db (2.8.3-2) ...

Vérifiez l'arborescence du module accounts :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts$ tree
.
├── examples
│   └── init.pp
├── files
│   └── sshd_config
├── manifests
│   ├── groups.pp
│   ├── init.pp
│   └── ssh.pp
└── templates

4 directories, 5 files

Naviguez vers le répertoire /etc/puppetlabs/code/environments/production/modules/accounts/examples :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts$ cd examples/

Testez ensuite l'application du manifest init.pp :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples$ sudo /opt/puppetlabs/bin/puppet apply --noop init.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.24 seconds
Notice: /Stage[main]/Accounts::Ssh/File[/etc/ssh/sshd_config]/content: current_value '{md5}739d6887c8f3dd71a9168c614c07175c', should be '{md5}0876b6b0db0707db221a5c736d8a896a' (noop)
Notice: /Stage[main]/Accounts::Ssh/Service[ssh]: Would have triggered 'refresh' from 1 event
Notice: Class[Accounts::Ssh]: Would have triggered 'refresh' from 2 events
Notice: Stage[main]: Would have triggered 'refresh' from 1 event
Notice: Applied catalog in 0.03 seconds

Et finalement appliquez le manifest :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples$ sudo /opt/puppetlabs/bin/puppet apply init.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.25 seconds
Notice: /Stage[main]/Accounts::Ssh/File[/etc/ssh/sshd_config]/content: content changed '{md5}0876b6b0db0707db221a5c736d8a896a' to '{md5}1ddc2551e3c3766390706609083581b2'
Notice: /Stage[main]/Accounts::Ssh/Service[ssh]: Triggered 'refresh' from 1 event
Notice: Applied catalog in 0.09 seconds

Installez le paquet iptables-persistent ou iptables-services dans chaque machine virtuelle en fonction de la distribution :

toto@master:/etc/puppetlabs/code/environments/production/modules/accounts/examples$ cd ~
toto@master:~$ sudo apt install iptables-persistent

root@slave01:~# apt install iptables-persistent

[root@slave02 ~]# systemctl stop firewalld && systemctl disable firewalld
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
[root@slave02 ~]# yum install iptables-services

Installez le module Puppet puppetlabs-firewall dans la machine virtuelle puppetmaster :

toto@master:~$ sudo /opt/puppetlabs/bin/puppet module install puppetlabs-firewall
Notice: Preparing to install into /etc/puppetlabs/code/environments/production/modules ...
Notice: Downloading from https://forgeapi.puppet.com ...
Notice: Installing -- do not interrupt ...
/etc/puppetlabs/code/environments/production/modules
└─┬ puppetlabs-firewall (v2.2.0)
  └── puppetlabs-stdlib (v6.2.0)

Naviguez maintenant vers le répertoire /etc/puppetlabs/code/environments/production/modules/firewall/manifests/ :

toto@master:~$ cd /etc/puppetlabs/code/environments/production/modules/firewall/manifests/
toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ 

Créez le fichier pre.pp qui contiendra toutes les règles de base du pare-feu pour le réseau :

toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ sudo vi pre.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ cat pre.pp
class firewall::pre {

  Firewall {
    require => undef,
  }

   # Accept all loopback traffic
  firewall { '000 lo traffic':
    proto       => 'all',
    iniface     => 'lo',
    action      => 'accept',
  }->

   #Drop non-loopback traffic
  firewall { '001 reject non-lo':
    proto       => 'all',
    iniface     => '! lo',
    destination => '127.0.0.0/8',
    action      => 'reject',
  }->

   #Accept established inbound connections
  firewall { '002 accept established':
    proto       => 'all',
    state       => ['RELATED', 'ESTABLISHED'],
    action      => 'accept',
  }->

   #Allow all outbound traffic
  firewall { '003 allow outbound':
    chain       => 'OUTPUT',
    action      => 'accept',
  }->

   #Allow ICMP/ping
  firewall { '004 allow icmp':
    proto       => 'icmp',
    action      => 'accept',
  }

   #Allow SSH connections
  firewall { '005 Allow SSH':
    dport    => '22',
    proto   => 'tcp',
    action  => 'accept',
  }->

   #Allow HTTP/HTTPS connections
  firewall { '006 HTTP/HTTPS connections':
    dport    => ['80', '443'],
    proto   => 'tcp',
    action  => 'accept',
  }

}

Créez le fichier post.pp pour interdire tout trafic qui n'est pas spécifiquement autorisé par le fichier pre.pp :

toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ sudo vi post.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ cat post.pp
class firewall::post {

  firewall { '999 drop all':
    proto  => 'all',
    action => 'drop',
    before => undef,
  }

}

Vérifiez la syntaxe des deux fichiers :

toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ sudo /opt/puppetlabs/bin/puppet parser validate pre.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ 
toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ sudo /opt/puppetlabs/bin/puppet parser validate post.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ 

Vérifiez l'arborescence du répertoire manifests :

toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ tree
.
├── init.pp
├── linux
│   ├── archlinux.pp
│   ├── debian.pp
│   ├── gentoo.pp
│   └── redhat.pp
├── linux.pp
├── params.pp
├── post.pp
└── pre.pp

1 directory, 9 files

Naviguez vers le répertoire principal des manifests :

toto@master:/etc/puppetlabs/code/environments/production/modules/firewall/manifests$ cd /etc/puppetlabs/code/environments/production/manifests
toto@master:/etc/puppetlabs/code/environments/production/manifests$ 

Créez le fichier site.pp qui pilote l'ensemble des autres classes définies dans les fichiers précédents :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo vi site.pp
toto@master:/etc/puppetlabs/code/environments/production/manifests$ cat site.pp
node default {

}

node 'master.i2tch.loc' {

  include accounts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

  firewall { '200 Allow Puppet Master':
    dport         => '8140',
    proto         => 'tcp',
    action        => 'accept',
  }

}

Vérifiez la syntaxe du fichier site.pp :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo /opt/puppetlabs/bin/puppet parser validate site.pp
toto@master:/etc/puppetlabs/code/environments/production/manifests$ 

Testez l'exécution de ce manifest :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo /opt/puppetlabs/bin/puppet apply --noop site.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.14 seconds
Notice: /Stage[main]/Firewall::Pre/Firewall[000 lo traffic]/ensure: current_value 'absent', should be 'present' (noop)
Notice: /Stage[main]/Firewall::Pre/Firewall[001 reject non-lo]/ensure: current_value 'absent', should be 'present' (noop)
Notice: /Stage[main]/Firewall::Pre/Firewall[002 accept established]/ensure: current_value 'absent', should be 'present' (noop)
Notice: /Stage[main]/Firewall::Pre/Firewall[003 allow outbound]/ensure: current_value 'absent', should be 'present' (noop)
Notice: /Stage[main]/Firewall::Pre/Firewall[004 allow icmp]/ensure: current_value 'absent', should be 'present' (noop)
Notice: /Stage[main]/Firewall::Pre/Firewall[005 Allow SSH]/ensure: current_value 'absent', should be 'present' (noop)
Notice: /Stage[main]/Firewall::Pre/Firewall[006 HTTP/HTTPS connections]/ensure: current_value 'absent', should be 'present' (noop)
Notice: Class[Firewall::Pre]: Would have triggered 'refresh' from 7 events
Notice: /Stage[main]/Main/Node[master.i2tch.loc]/Firewall[200 Allow Puppet Master]/ensure: current_value 'absent', should be 'present' (noop)
Notice: Node[master.i2tch.loc]: Would have triggered 'refresh' from 1 event
Notice: Class[Main]: Would have triggered 'refresh' from 1 event
Notice: /Stage[main]/Firewall::Post/Firewall[999 drop all]/ensure: current_value 'absent', should be 'present' (noop)
Notice: Class[Firewall::Post]: Would have triggered 'refresh' from 1 event
Notice: Stage[main]: Would have triggered 'refresh' from 3 events
Notice: Applied catalog in 0.17 seconds

Appliquez maintenant le manifest site.pp :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo /opt/puppetlabs/bin/puppet apply site.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.12 seconds
Notice: /Stage[main]/Firewall::Pre/Firewall[000 lo traffic]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[001 reject non-lo]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[002 accept established]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[003 allow outbound]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[004 allow icmp]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[005 Allow SSH]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[006 HTTP/HTTPS connections]/ensure: created
Notice: /Stage[main]/Main/Node[master.i2tch.loc]/Firewall[200 Allow Puppet Master]/ensure: created
Notice: /Stage[main]/Firewall::Post/Firewall[999 drop all]/ensure: created
Notice: Applied catalog in 0.98 seconds

Visualisez les règles du pare-feu :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     all  --  anywhere             anywhere             /* 000 lo traffic */
REJECT     all  --  anywhere             localhost/8          /* 001 reject non-lo */ reject-with icmp-port-unreachable
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED /* 002 accept established */
ACCEPT     icmp --  anywhere             anywhere             /* 004 allow icmp */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports ssh /* 005 Allow SSH */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http,https /* 006 HTTP/HTTPS connections */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports puppet /* 200 Allow Puppet Master */
DROP       all  --  anywhere             anywhere             /* 999 drop all */

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             /* 003 allow outbound */

Modifiez le manifest site.pp pour inclure les sections pour déclarer les classes, les modules et les ressources à appliquer à node01.i2tch.loc et à node02.i2tch.loc :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo vi site.pp
toto@master:/etc/puppetlabs/code/environments/production/manifests$ cat site.pp
node default {

}

node 'master.i2tch.loc' {

  include accounts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

  firewall { '200 Allow Puppet Master':
    dport         => '8140',
    proto         => 'tcp',
    action        => 'accept',
  }

}

node 'slave01.i2tch.loc' {

  include accounts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

}

node 'slave02.i2tch.loc' {

  include accounts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

}

Connectez-vous à la machine virtuelle node01.i2tch.loc en ssh et devenez root :

trainee@slave01:~$ su -
Password: fenestros

Exécutez l'agent Puppet :

root@slave01:~# /opt/puppetlabs/bin/puppet agent -t
...
Notice: /Stage[main]/Accounts::Ssh/Service[ssh]: Triggered 'refresh' from 1 event
Notice: /Stage[main]/Accounts/User[toto]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[000 lo traffic]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[001 reject non-lo]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[002 accept established]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[003 allow outbound]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[004 allow icmp]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[005 Allow SSH]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[006 HTTP/HTTPS connections]/ensure: created
Notice: /Stage[main]/Firewall::Post/Firewall[999 drop all]/ensure: created
Notice: Applied catalog in 1.78 seconds

Déconnectez-vous :

root@slave01:~# exit
logout
trainee@slave01:~$ exit
logout
Connection to localhost closed.

Re-connectez-vous à la machine virtuelle node01.i2tch.loc en ssh et en tant que l'utilisateur toto :

...
Welcome to Ubuntu 18.04.1 LTS (GNU/Linux 4.15.0-29-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage


 * Canonical Livepatch is available for installation.
   - Reduce system reboots and improve kernel security. Activate at:
     https://ubuntu.com/livepatch

330 packages can be updated.
8 updates are security updates.

*** System restart required ***

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

toto@slave01:~$ 

Vérifiez que les règles du pare-feu ont été appliquées :

toto@slave01:~$ sudo iptables -L
[sudo] password for toto: toto
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     all  --  anywhere             anywhere             /* 000 lo traffic */
REJECT     all  --  anywhere             localhost/8          /* 001 reject non-lo */ reject-with icmp-port-unreachable
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED /* 002 accept established */
ACCEPT     icmp --  anywhere             anywhere             /* 004 allow icmp */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports ssh /* 005 Allow SSH */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http,https /* 006 HTTP/HTTPS connections */
DROP       all  --  anywhere             anywhere             /* 999 drop all */

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             /* 003 allow outbound */

Connectez-vous à la machine virtuelle node02.i2tch.loc en ssh et devenez root :

[trainee@slave02 ~]$ su -
Mot de passe : fenestros
Dernière connexion : mercredi 13 mars 2019 à 22:01:35 CET sur pts/0
[root@slave02 ~]# 

Exécutez l'agent Puppet :

[root@slave02 ~]# /opt/puppetlabs/bin/puppet agent -t
...
Notice: /Stage[main]/Firewall::Pre/Firewall[000 lo traffic]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[001 reject non-lo]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[002 accept established]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[003 allow outbound]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[004 allow icmp]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[005 Allow SSH]/ensure: created
Notice: /Stage[main]/Firewall::Pre/Firewall[006 HTTP/HTTPS connections]/ensure: created
Notice: /Stage[main]/Firewall::Post/Firewall[999 drop all]/ensure: created
Notice: Applied catalog in 0.97 seconds

Déconnectez-vous :

[root@slave02 ~]# exit
logout
[trainee@slave02 ~]$ exit
déconnexion
Connection to localhost closed.

Re-connectez-vous à la machine virtuelle node02.i2tch.loc en ssh et en tant que l'utilisateur toto. Vérifiez que les règles du pare-feu ont été appliquées :

-bash-4.2$ sudo iptables -L

Nous espérons que vous avez reçu de votre administrateur système local les consignes traditionnelles. Généralement, elles se concentrent sur ces trois éléments :

    #1) Respectez la vie privée des autres.
    #2) Réfléchissez avant d'utiliser le clavier.
    #3) De grands pouvoirs confèrent de grandes responsabilités.

[sudo] Mot de passe de toto : toto
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     all  --  anywhere             anywhere             /* 000 lo traffic */
REJECT     all  --  anywhere             loopback/8           /* 001 reject non-lo */ reject-with icmp-port-unreachable
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED /* 002 accept established */
ACCEPT     icmp --  anywhere             anywhere             /* 004 allow icmp */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports ssh /* 005 Allow SSH */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http,https /* 006 HTTP/HTTPS connections */
DROP       all  --  anywhere             anywhere             /* 999 drop all */

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             /* 003 allow outbound */

Le but ici est de créer un rôle contenant les fichiers suivants :

.
├── examples
│   └── init.pp
├── files
│   ├── apache2.conf
│   └── httpd.conf
├── manifests
│   ├── init.pp
│   ├── params.pp
│   └── vhosts.pp
└── templates
    ├── vhosts-deb.conf.erb
    └── vhosts-rh.conf.erb

Naviguez vers le répertoire /etc/puppetlabs/code/environments/production/modules/ et créez le sous-répertoire apache :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ cd ../modules/
toto@master:/etc/puppetlabs/code/environments/production/modules$ 
toto@master:/etc/puppetlabs/code/environments/production/modules$ sudo mkdir apache

Placez-vous dans le répertoire /etc/puppetlabs/code/environments/production/modules/apache et créez les répertoires manifests, templates, files et examples :

toto@master:/etc/puppetlabs/code/environments/production/modules$ cd apache
toto@master:/etc/puppetlabs/code/environments/production/modules/apache$ sudo mkdir {manifests,templates,files,examples}

Placez-vous dans le répertoire /etc/puppetlabs/code/environments/production/modules/apache/manifests :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache$ cd manifests/

Créez le manifest init.pp :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ sudo vi init.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ cat init.pp
class apache (
  $apachename   = $::apache::params::apachename,
  $conffile   = $::apache::params::conffile,
  $confsource = $::apache::params::confsource,
) inherits ::apache::params {

  package { 'apache':
    name    => $apachename,
    ensure  => present,
  }

  file { 'configuration-file':
    path    => $conffile,
    ensure  => file,
    source  => $confsource,
    notify  => Service['apache-service'],
  }

  service { 'apache-service':
    name	  => $apachename,
    hasrestart	  => true,
  }

}

Dans ce fichier on note :

• le paquet à installer est référencé par une variable $apachename,
• la variable $apachename est fixée par la classe apache::params et injecté dans le fichier grâce à $apachename = $::apache::params::apachename,
• la ressource file utilise deux variables, $conffile et $confsource, également fixées par la classe apache::params.

Créez ensuite le manifest params.pp pour définir la classe apache::params :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ sudo vi params.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ cat params.pp
class apache::params {

  if $::osfamily == 'RedHat' {
    $apachename   = 'httpd'
    $conffile     = '/etc/httpd/conf/httpd.conf'
    $confsource   = 'puppet:///modules/apache/httpd.conf'
  }
  elsif $::osfamily == 'Debian' {
    $apachename   = 'apache2'
    $conffile     = '/etc/apache2/apache2.conf'
    $confsource   = 'puppet:///modules/apache/apache2.conf'
  }
  else {
    fail ( 'this is not a supported distro.')
  }

}

Les hôtes virtuels d'Apache sont gérés différement selon que $::osfamily soit RedHat ou Debian. Créez donc le manifest vhosts.pp :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ sudo vi vhosts.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ cat vhosts.pp
class apache::vhosts {

  if $::osfamily == 'RedHat' {
    file { '/etc/httpd/conf.d/vhost.conf':
      ensure    => file,
      content   => template('apache/vhosts-rh.conf.erb'),
    }
    file { [ "/var/www/$servername",
             "/var/www/$servername/public_html",
             "/var/www/$servername/logs", ]:
      ensure    => directory,
    }
  } elsif $::osfamily == 'Debian' {
    file { "/etc/apache2/sites-available/$servername.conf":
      ensure  => file,
      content  => template('apache/vhosts-deb.conf.erb'),
    }
    file { [ "/var/www/$servername",
             "/var/www/$servername/public_html",
             "/var/www/$servername/logs", ]:
      ensure    => directory,
    }
  } else {
    fail ( 'This is not a supported distro.')
  }

}

Le fichier ci-dessus fait référence à deux $confsource différents selon que $osfamily soit RedHat ou Debian. Ces fichiers doivent être créés et sont des fichiers standards de configuration d'Apache.

Naviguez vers le répertoire cd /etc/puppetlabs/code/environments/production/modules/apache/files :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ cd ../files/
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/files$  

Créez le fichier httpd.conf suivant :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/files$ sudo vi httpd.conf
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/files$ cat httpd.conf
# This file is managed by Puppet
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/content/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/content/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"

#
# Relax access to content within /var/www.
#
<Directory "/var/www">
    AllowOverride None
    # Allow open access:
    Require all granted
</Directory>

# Further relax access to the default document root:
<Directory "/var/www/html">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/content/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /etc/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default.  To use the 
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile conf/magic
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on

# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf

Créez aussi le fichier apache2.conf :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/files$ sudo vi apache2.conf
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/files$ cat apache2.conf
# This file is managed by Puppet
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/content/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#	/etc/apache2/
#	|-- apache2.conf
#	|	`--  ports.conf
#	|-- mods-enabled
#	|	|-- *.load
#	|	`-- *.conf
#	|-- conf-enabled
#	|	`-- *.conf
# 	`-- sites-enabled
#	 	`-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/content/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
	Options FollowSymLinks
	AllowOverride None
	Require all denied
</Directory>

<Directory /usr/share>
	AllowOverride None
	Require all granted
</Directory>

<Directory /var/www/>
	Options Indexes FollowSymLinks
	AllowOverride None
	Require all granted
</Directory>

#<Directory /srv/>
#	Options Indexes FollowSymLinks
#	AllowOverride None
#	Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
	Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

Le fichier vhosts.pp fait référence à deux fichiers de gabarit (templates). Naviguez donc au répertoire /etc/puppetlabs/code/environments/production/modules/apache/templates :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/files$ cd ../templates/
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/templates$

Créez le fichier /etc/puppetlabs/code/environments/production/modules/apache/templates/vhosts-rh.conf.erb :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/templates$ sudo vi vhosts-rh.conf.erb
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/templates$ cat vhosts-rh.conf.erb
<VirtualHost *:80>
    ServerAdmin	<%= @adminemail %>
    ServerName <%= @servername %>
    ServerAlias www.<%= @servername %>
    DocumentRoot /var/www/<%= @servername -%>/public_html/
    ErrorLog /var/www/<%= @servername -%>/logs/error.log
    CustomLog /var/www/<%= @servername -%>/logs/access.log combined
</VirtualHost>

Ainsi que le fichier /etc/puppetlabs/code/environments/production/modules/apache/templates/vhosts-deb.conf.erb :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/templates$ sudo vi vhosts-deb.conf.erb
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/templates$ cat vhosts-deb.conf.erb
<VirtualHost *:80>
    ServerAdmin	<%= @adminemail %>
    ServerName <%= @servername %>
    ServerAlias www.<%= @servername %>
    DocumentRoot /var/www/html/<%= @servername -%>/public_html/
    ErrorLog /var/www/html/<%= @servername -%>/logs/error.log
    CustomLog /var/www/html/<%= @servername -%>/logs/access.log combined
    <Directory /var/www/html/<%= @servername -%>/public_html>
        Require all granted
    </Directory>
</VirtualHost>

Naviguez au répertoire /etc/puppetlabs/code/environments/production/modules/apache et vérifez l'arborescence du module :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/templates$ cd ..
toto@master:/etc/puppetlabs/code/environments/production/modules/apache$ tree
.
├── examples
├── files
│   ├── apache2.conf
│   └── httpd.conf
├── manifests
│   ├── init.pp
│   ├── params.pp
│   └── vhosts.pp
└── templates
    ├── vhosts-deb.conf.erb
    └── vhosts-rh.conf.erb 

Retournez au répertoire /etc/puppetlabs/code/environments/production/modules/apache/manifests :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache$ cd manifests/
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ 

Vérifiez la syntaxe des manifests init.pp, params.pp et vhosts.pp :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ sudo /opt/puppetlabs/bin/puppet parser validate init.pp params.pp vhosts.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ 

Naviguez vers le répertoire /etc/puppetlabs/code/environments/production/modules/apache/examples :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/manifests$ cd ../examples/
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/examples$ 

Créez le fichier init.pp pour définir les valeurs des deux variables $serveremail et $servername :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/examples$ sudo vi init.pp
toto@master:/etc/puppetlabs/code/environments/production/modules/apache/examples$ cat init.pp
$serveremail = 'webmaster@i2tch.loc'
$servername = 'i2tch.loc'

include apache
include apache::vhosts

Naviguez au répertoire /etc/puppetlabs/code/environments/production/modules/apache et vérifez l'arborescence du module :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/examples$ cd ..
toto@master:/etc/puppetlabs/code/environments/production/modules/apache$ tree
.
├── examples
│   └── init.pp
├── files
│   ├── apache2.conf
│   └── httpd.conf
├── manifests
│   ├── init.pp
│   ├── params.pp
│   └── vhosts.pp
└── templates
    ├── vhosts-deb.conf.erb
    └── vhosts-rh.conf.erb

4 directories, 8 files

Retournez au répertoire /etc/puppetlabs/code/environments/production/modules/apache/examples :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache$ cd examples/

Testez l'application avec l'option –noop :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/examples$ sudo /opt/puppetlabs/bin/puppet apply --noop init.pp
Notice: Compiled catalog for master.i2tch.loc in environment production in 0.03 seconds
Notice: /Stage[main]/Apache/Package[apache]/ensure: current_value 'purged', should be 'present' (noop)
Notice: /Stage[main]/Apache/File[configuration-file]/ensure: current_value 'absent', should be 'file' (noop)
Notice: /Stage[main]/Apache/Service[apache-service]: Would have triggered 'refresh' from 1 event
Notice: Class[Apache]: Would have triggered 'refresh' from 3 events
Notice: /Stage[main]/Apache::Vhosts/File[/etc/apache2/sites-available/i2tch.loc.conf]/ensure: current_value 'absent', should be 'file' (noop)
Notice: /Stage[main]/Apache::Vhosts/File[/var/www/i2tch.loc]/ensure: current_value 'absent', should be 'directory' (noop)
Notice: /Stage[main]/Apache::Vhosts/File[/var/www/i2tch.loc/public_html]/ensure: current_value 'absent', should be 'directory' (noop)
Notice: /Stage[main]/Apache::Vhosts/File[/var/www/i2tch.loc/logs]/ensure: current_value 'absent', should be 'directory' (noop)
Notice: Class[Apache::Vhosts]: Would have triggered 'refresh' from 4 events
Notice: Stage[main]: Would have triggered 'refresh' from 2 events
Notice: Applied catalog in 0.14 seconds

Naviguez au répertoire manifests de l'environnement :

toto@master:/etc/puppetlabs/code/environments/production/modules/apache/examples$ cd /etc/puppetlabs/code/environments/production/manifests
toto@master:/etc/puppetlabs/code/environments/production/manifests$ 

Modifiez le fichier site.pp :

toto@master:/etc/puppetlabs/code/environments/production/manifests$ sudo vi site.pp 
toto@master:/etc/puppetlabs/code/environments/production/manifests$ cat site.pp 
node default {

}

node 'master.i2tch.loc' {

  include accounts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

  firewall { '200 Allow Puppet Master':
    dport         => '8140',
    proto         => 'tcp',
    action        => 'accept',
  }

}

node 'slave01.i2tch.loc' {
  $adminemail = 'webmaster@i2tch.loc'
  $servername = 'slave01.i2tch.loc'

  include accounts
  include apache
  include apache::vhosts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

  }

node 'slave02.i2tch.loc' {
  $adminemail = 'webmaster@i2tch.loc'
  $servername = 'slave02.i2tch.loc'

  include accounts
  include apache
  include apache::vhosts

  resources { 'firewall':
    purge => true,
  }

  Firewall {
    before        => Class['firewall::post'],
    require       => Class['firewall::pre'],
  }

  class { ['firewall::pre', 'firewall::post']: }

  }

Exécutez l'agent de Puppet sur la machine slave01 :

toto@slave01:~$ sudo /opt/puppetlabs/bin/puppet agent -t
[sudo] password for toto: 
Info: Using configured environment 'production'
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Retrieving locales
Info: Loading facts
Info: Caching catalog for slave01.i2tch.loc
Info: Applying configuration version '1582373993'
...
Notice: Applied catalog in 24.16 seconds

Ainsi que la machine slave02 :

-bash-4.2$ sudo /opt/puppetlabs/bin/puppet agent -t
[sudo] Mot de passe de toto : 
Info: Using configured environment 'production'
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Retrieving locales
Info: Loading facts
Info: Caching catalog for slave02.i2tch.loc
Info: Applying configuration version '1582374068'
...
Notice: Applied catalog in 39.38 seconds

Backup 2019.beta restauré en 2020.01.

• Fixed - Erreur : master.ich.loc > master.i2tch.loc dans le fichier /etc/hosts de la machine puppetmaster.
• Fixed - Erreur : ' > “ dans le fichier /etc/puppetlabs/code/environments/production/modules/apache/manifests/vhosts.conf.
• Fixed - Erreur …<%- @servername -%>/logs/error.log > …<%= @servername -%>/logs/error.log dans les fichiers /etc/puppetlabs/code/environments/production/modules/apache/templates/vhosts-deb.conf.erb et /etc/puppetlabs/code/environments/production/modules/apache/templates/vhosts-rh.conf.erb
• Fixed - Erreur : </Virtual Host> > </VirtualHost> dans les fichiers /etc/puppetlabs/code/environments/production/modules/apache/templates/vhosts-deb.conf.erb et /etc/puppetlabs/code/environments/production/modules/apache/templates/vhosts-rh.conf.erb
• Fixed - Erreur : ”/var/www/$servername/log“ > ”/var/www/$servername/logs“ dans la section $::osfamily == 'RedHat' du fichier /etc/puppetlabs/code/environments/production/modules/apache/manifests/vhosts.pp
• Fixed - Erreur : SELinux en mode enforcing au lieu de permissive dans la vm puppetslave02.
• Added - Arborescences des modules.

<html> <DIV ALIGN=“CENTER”> Copyright © 2020 Hugh Norris.<br><br> </div> </html>